DTE 520

Addressable Temperature Detector

The DTE 520 detector is indicated for locations with the presence of dust, steam or gases suspended in the air, where smoke detectors are not recommended.
Colors

DTE 520
DTE 520 Addressable Temperature Detector is intended for locations where dust, vapor or airborne gases are present and smoke detectors are not recommended. If the alarm temperature is reached, the detector will send a warning to the control panel stating its location through the address. It has an alarm/supervision LED indicator with low power consumption and modern and technological design. 

Compatible with addressable switchboards: CIE 1125/1250/2500.


DTE 520

 

DTE 520


Installation with 2 wires

DTE 520 uses only two wires in the installation, making it simpler, faster and providing cabling savings.

DTE 520

Supervision and alarm indicator LED

When there is a beginning of fire, the alarm LED will light red while the supervisory LED, which identifies when the product is on/running, will flash every 2 seconds.

DTE 520

Class A and/or B installation

DTE 520 allows installation of connection devices in closed connection configuration (class A) or non-return wiring (class B). 

DTE 520

No restriction on polarity reversal

The negative wire can be replaced with the positive and vice versa to reduce the chances of damage to the product.